Kenmore Calypso Manual Diagnostic Flame

Posted By admin  On 20.04.21



Download

Whirlpool Calypso GEW9868KQ1 Repair Death Of The Vintage Whirlpool Calypso Washer Whirlpool Calypso Washer Trash Find Whirlpool WTW5000DW0 Service Manual Fix and Diagnose Kenmore Oasis / Whirlpool Duet hE WasherKenmore / Whirlpool Washer Not Spinning 1. Check the house washer drain and clear any clogs. Check the drain hose and clear any kinks or clogs. Unplug the washer and drain the tub using a wet/dry shop vac. Check the hose between the tub and the drain pump and clear any clogs.

  • So, enter that Kenmore model in the eld on the left to get servicing. Also, here are a few popular Kenmore washer models that customers have received. 13 washer service manual 10 washer service manual 12 washer service manual 10 washer service manual 10 washer service manual.
  • Appliance Repair School 1987-1988 Star Appliance Tech. 1988-1990 Wards Appliance Tech. 1990-2001 Sears Appliance Tech.
  • Whirlpool Calypso GEW9868KQ1 Repair Death Of The Vintage Whirlpool Calypso Washer Whirlpool Calypso Washer Trash Find Whirlpool WTW5000DW0 Service Manual Fix and Diagnose Kenmore Oasis / Whirlpool Duet hE WasherKenmore / Whirlpool Washer Not Spinning 1.
44 pages, 4.58 Mb
Success! {{ $ctrl.successMessage }}
0'>Errors!
>
11. “FV-SENSE” and “OPEN” Flashing
Flammable Vapor Sensor is open
sensor.
2. Remove the connectors from the
the resistance of the sensor with an
1.7 million ohms, replace the
million ohms, and the wiring from
replace the lower control.
12.“FV-SENSE” and “SHORT” Flashing
Flammable Vapor Sensor is
1. Check all wiring to the ammable vapor
ammable vapor sensor and measure
ohmmeter.
A. If the reading taken is less than
vapor sensor.
B. If the reading taken is more than
control to the sensor is good,
13.“THMSTR” and “OPEN” Flashing
detected the temperature sensor
probe is open.
on again to clear this error code.
2. This part of the control cannot be
cannot be cleared, the lower control must
14.Calypso“THMSTR” and “SHORT” Flashing
detected the temperature sensor
probe is shorted.
on again to clear this error code.
2. This part of the control cannot be
cannot be cleared, the lower control must
15.All Segments Flashing
detected one or both of the
are stuck.
temperature adjustment buttons. If the
control will continue to regulate the water
settings will no longer be adjustable – the
16.“P-ANODE” and “OPEN” Flashing
1. Check the wire that runs from the power
wire for damage, and to ensure that the
mating connectors on both ends.
2. Check that the tank is full of water. Never
completely full of water. To prevent
lled with water. Water must ow from
gas to the water heater.
17.“P-ANODE” Flashing
1. Turn the power o for 10 to 20 seconds
cleared, replace the upper control.
10. “LDO-SW”, “OPEN”, and “CLEAN SCREEN” Flashing
intake chamber, retest.
remain open longer than 5
is energized.
special FVS reset sequence into the Electronic
Display - FV - Sense Reset Sequence in
Handbook.
9. “FV-SENSE” Flashing(Continued from previous page)CONTROL DISPLAY STATUSPROBLEM SOLUTION
water heater “OFF” and “ON” to reset.
“ON” to reset.

Troubleshooting Calypso Washing Machine Problems

Common Calypso Washer Problems

Wire Diagram - Won't Power Up - Won't Start Cycle -
Control Won't Accept Commands - Won't Shut Off -
Won't Fill/ Dispense - Overfills - Won't Nutate - Won't Spin -
Won't Drain - Motor Overheats, - Tripping GFI, - Washer Vibrating - Incorrect Water TemperatureWon't Recirculate Water- Display Flashing

Other Calypso Washing Machine Repair Links:

Calypso Washing Machine Components Guide
Calypso Washing Machine Diagnostic Modes Guide

Calypso Wire Diagram



Click the wire diagram for larger view

My Calypso Won't Power Up

More than likely you are having a power supply problem with your washing machine. Possible causes are..
1. No power at the wall receptacle. Repair: Check the wall receptacle for 120VAC.
2. A bad washer power cord. Repair: Disconnect the power cord form the wall and the washer and check the wires for continuity.
3. Bad line filter (an electricity cleaning device that is located between the power cord and the control board.) Repair: Check Voltage into and out of the line filter.
4. Bad machine control board. Repair: With the washer off but still connected to the wall outlet measure for 120VAC between pins 4 and 2 at connector P16 on the washing machine control board.

Kenmore calypso manual diagnostic flame sensor

My Calypso Won't Start The Cycle

If you calypso seems to have power but will not start the cycle there are three possibilities..
1. The lid switch is broken or contacts have come loose. Repair: If 'LS' is flashing, open and close lid to clear the fault code and restart cycle. Check the lid switch for contacts opening/closing.
2. Loose connections to the washing machine's control board. Repair: Check that all connections to the washing machine's control board are making good contact.
3. The console switch panel has a problem. Repair: Check the console switches with the calypso diagnostic mode. (if the keypad is unresponsive check it's connection to the machine control board, it may need replacement.)

My Calypso Control Won't Accept Commands

So calypso doesn't want to dance? Well if the washer seems to have power but the touch pad doesn't accept your washing wishes there are only a few possibilities..
1. The console touch panel has a problem or..

Kenmore Calypso Manual Diagnostic Flame Sensor

2. it has a loose contact to the washing machine control board. Repair: Check the console switches with the calypso diagnostic mode. (if the keypad is unresponsive check it's connection to the machine control board, it may need replacement.)

My Calypso Won't Shut Off

Maybe you washer just really likes it's job, or..
1. The lid switch has a problem. Repair: check the lid switch contacts at the machine control board for closed and open continuity.
2. the 'stop/ cancel' button of the console switch pad has failed. Repair: Check the console switches with the calypso diagnostic mode. Gold miner full screen version. (if the keypad is unresponsive check it's connection to the machine control board, it may need replacement.)

My Calypso Won't Fill, Dispense Soap, Fabric Softener, or Bleach

Your washer can nutate all it wants but without water, detergent, and other chemical cleaning additives your clothes are not going to get very clean. Fortunately the possible causes for calypso washing machine that won't dispense are minor.
1.The dispenser solenoid or valve may have a problem. Repair: Check the dispenser valve for continuity and proper operation.
2. Loose wire connections to the washing machine's water valve. Repair: check that all wire connections to the valve are making good contact.
3. The water valve, internal dispenser supply hoses, or dispensing cups are clogged. Download iphone drivers windows. Repair: Seek out and destroy that clog. (clogs are usually at the dispenser cup

My Calypso Overfills

Kenmore Calypso Manual Diagnostic Flame Control

When washing machines over fill the problem is usually related to the pressure switch. In the case of a Calypso washing machine there are two pressure switches, you will mainly be wanting to check the operating pressure switch labeled 'OPR'. Also check that the pressure switch hoses that are attached to the pressure switch are not kinked or punctured. Small holes in the tubing can cause an intermittent problem that can be difficult to pin point. Also check for a loose wire connection to the pressure switch.

One rare possibility would be that the washing machine is not draining properly. Use the Calypso diagnostic mode to check the drain function of the washer.

Kenmore Calypso Manual Diagnostic Flame Generator

My Calypso Won't Nutate/ Agitate

Make sure no one is around then yell 'Nutate you stupid washing machine!' then kick it. (Note: Results may vary) Or you could..
1. Check for loose wire connections to the washing machine's motor controller and machine controller boards.
2. Check the motor windings for proper resistance values. (Using the table located here.)
3. Check for a broken drive belt.
4. Check the drive motor, nuate shaft, leveler, inner wash plate, and universal joint for binding. (In other words if all the easy stuff checks out it would be best to call a professional appliance service technician and save yourself the trouble.) Avox plugins.

My Calypso Won't Spin

Kenmore Calypso Manual Diagnostic Flame Detector

For your Calypso washing machine to spin several things need to happen. This is a fairly complicated mechanical system so check the easy stuff, and If that doesn't work call an appliance repair company you trust. In many cases large/ expensive repairs on a Calypso washing machine are not a good idea.
1. Check for loose wire connections to the washing machine's motor controller and machine controller boards.
2. Check the motor windings for proper resistance values. (Using the table located here.)
3. Check for a broken drive belt.
4. Check the drive motor, nuate shaft, leveler, inner wash plate, and universal joint for binding. (In other words if all the easy stuff checks out it would be best to call a professional appliance service technician and save yourself the trouble.)